Accessories
The TANtec central control can be enlarged by the following products
Touch screen
The touch screen is for doing inputs directly on the
screee, e.g. choosing a cabine by touching the cabines window. The
touch screen is for enlarging the TANtec 7070 because TANtec 2002
is always
delivered with touch screen.
Cash drawer
The cash drawer for the sales
counter
system contains the money and opens by software when there are sellings
or a cash tanning made.
Roller
blind
control
Some
tanning studios
are placing a sunbed in shop window and shut a roller blind for usage
of sunbed.
The roller blind control is an additional module connected to a TANtec
terminal for automatic handling of roller blind. It contains several
inputs and an output relais working as change-over switch. This relais
receives supply voltage 230 V~ from roller blind and switches between
position
"roller blind open" and "roller blind closed".
-
The data input is for connection to TANtec terminal roller blind output using a two pole cord. So it is easy to mount the roller blind control directly to the roller blind and connect it with a thin cord to terminal, because of 12 V protective voltage. When the terminal starts pre-run mode, the roller blind closes, when the cabine gets free again, the roller blind opens.
-
The door switch is for usage in self service studios, where the sunbed gets free automatically. The roller blind only opens, when additionally the door switch is open.
-
The switch input allow to control the roller blind separate from tanning. It is possible to use two single switches, or one change-over switch.
There is no interlocking or priority, but the control only reacts to change of input state. So it is possible to open the roller blind by switch input even when there is a tanning going on. For control of data connection the interval of blinking LED changes, when the roller blind control detects input of a terminal.
Emergency control in case of PC damage
People sometimes ask for a separate emergency control.
We don't offer a separate emergency control, because both the
possibility of a central control and the single control of sunbeds are
always integrated into the Hardware.
Radio controlled clock DCF77
The PC clocks often are inaccurate making
it
necessary to adjust them periodical. Using the radio controlled clock
the PC takes over the accurate time from the
Physikalisch-Technische Bundesanstalt in Braunschweig.
Please be aware this device is only intended to be connected to our CRC bus system, not for use with a single PC.
Sales
slip printer
For printing of sales slips
there is a
sales slip printer available.